I have a bad diaphram that will not hold vacuum or engage my emergency drive. I tested the diaphram with a handheld vacuum tester and two short peices of brand new vacuum tubes connecterd right at diaphram nipples and the diaphram slow leaks. I have cut a 3 x 5 inch hole in my floorboard to replace the diaphram. (saw that on another post) I have already ordered a new diaphram from ebay. 40 dollars ..
Anyways, can anyoone offer a step by step or a little help on removing and replacing the diaphram?
Anyways, can anyoone offer a step by step or a little help on removing and replacing the diaphram?
Comment