What is the best way to install the replacement lift bar cushions? Is it possible w/o removing the glass and lift bar? Spent a couple hours trying reaching through the access holes in the door and can't seem to get it. If I have to remove the window, is there instructions available? My technical service manual is not real helpful
Announcement
Announcement Module
Collapse
No announcement yet.
Window lift bar cushion
Page Title Module
Move
Remove
Collapse
X
-
You do need to remove the glass and lifter to install the rubber between the glass and lifter.
1. Remove Door Panel
2. Loosen Lower Vent Window Bar by removing the bolts in the door panel area (you don't need to take out the top screws or bolts in the vent window)
3. Remove the window stop (held in by 2 bolts)
4. Remove the window lifter clip that holds the lifter to the regulator
5. Lower the glass by hand, once it gets to the bottom there is enough give in the vent window track to work the window free of the side tracks
6. Turn the window sideways and remove it through the top
Comment
Comment