Announcement Announcement Module
Collapse
No announcement yet.
Torque Arm question Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
  • #1

    Torque Arm question

    I bought the BJ's Torque Arm stud and the poly bushingshttp://www.bjsoffroad.com/prod-428.htm
    my question is, that it seems really lose.
    should it just flop around on the tranny cross brace?
    Tags: None
  • #2
    What T-case do you have?

    Comment

    • #3
      its on a Dana 20.
      I am really bummed out, I just installed my tranny with the polly trans mount and it pulled the threads right out of the mount.
      I dont know if I should risk getting another one or if I should just open the threads up to 7/16 x 14

      Comment

      • #4
        Can't help you on the mount stripping out. You may want to contact Brent or Ryan on that.

        For the torque arm bushing, I think Ihad to add some washers to mine. This may have been caused by the arm being slightly bent or something. It is very common for them to bend. But it should not be loose for it to work properly.

        Comment

        Working...
        X