Announcement Announcement Module
Collapse
No announcement yet.
Spring Over Axle Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
  • #1

    Spring Over Axle

    I'm considering getting the SOA kit but I was looking at my front axle (it's out of a '76 J-20) and noticed that one spring perch is cast into the center section with two different length U-bolts. Does one of the spring perches in the kit fit over this and where do you run the new U-bolts? If anyone has some pictures they cans share it would be appreciated!
    Tags: None
  • #2
    that gave me the most trouble but I don't have any good pics to show what I did. All I can remember is that I had to grind the weld on spring perch on top to fit the casting and the U-bolt that goes around the casting is bigger in size too.

    Comment

    • #3
      Does anyone have pictures of this installed on their rig? If I can see what the final install looks like I'm sure I can duplicate it.

      Comment

      Working...
      X